Details : KVR1066D3N7K2/2G 2GB (1GB 128M x 64-Bit x 2 pcs.) PC3-8500 CL7 240-Pin DIMM Kit Page 1
DESCRIPTION: ValueRAM's KVR1066D3N7K2/2G isa kit of two 128M x 64-bit 1GB(1024MB) DDR3-1066 CL7 SDRAM (Synchronous DRAM) memory modules, based onsixteen 64M x 8-bit DDR3-1066 FBGA components per module. The SPDs are programmed to JEDEC standard latency 1066Mhz timing of 7-7-7 at 1.5V. Each 240-pin DIMM uses gold contactfingers and requires +1.5V. The electrical and mechanical specifications are as follows:FEATURES: JEDEC standard 1.5V ± 0.075V Power Supply VDDQ = 1.5V ± 0.075V 533MHz fCK for 1066Mb/sec/pin 8 independent internal bank Programmable CAS Latency: 5,6,7,8,9,10 Posted CAS Programmable Additive Latency:0, CL - 2, or CL - 1 clock Programmable CAS Write Latency(CWL) = 7(DDR3-1066) 8-bit pre-fetch Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] Bi-directional Differential Data Strobe Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
On Die Termination using ODT pin
Average Refresh Period 7.8us at lower then TCASE 85°C, 3.9us at 85°C < TCASE . 95°C Asynchronous Reset 1066Mbps CL7 doesn’t have backward compatibility with 800Mbps CL5 PCB : Height 1.180” (30.00mm),double sided component PERFORMANCE: CL(IDD) 7 cycles Row Cycle Time (tRCmin) 50.63ns (min.) Refresh to Active/Refresh Command Time (tRFCmin) 90ns Row Active Time (tRASmin) 37.5ns (min.) Power TBD W (operating per module) UL Rating 94 V - 0 Operating Temperature 0o C to 85o C
Storage Temperature -55o C to +100o C
