Additional Product Information

HD103SJ Spinpoint F3 capacity : 1 TB interface : Serial ATA 3.0 Gbps

buffer memory : 32 MB

• MAX.500GB Formatted CapacityPer Disk • Serial ATA 3.0Gbps InterfaceSupport • Improved recording stabilityover temperature with PMR • Advanced dynamic FOD controlfor best data integrity • Intelligent compensation of external disturbance • SATA Native Command Queuing Feature • Device Initiated SATA Power Management • Rotational vibration sensor • Environment friendly productwith RoHS compliance • Improved performance with dual-ARM based firmware • ATA S.M.A.R.T. Compliant • ATA Automatic Acoustic Management Feature • ATA 48-bit Address Feature • ATA Device Configuration Overlay Feature • NoiseGuard™ • SilentSeek™

Drive Configurations

Drive Configurations Capacity* 750 GB Interface Serial ATA 3.0Gbps Buffer DRAM Size 32 MB Byte per Sector 512 bytes Rotational Speed 7,200 RPM

Performance Specifications

Performance Specifications Average Seek time(typical) 8.9 ms

Data Transfer Rate / Media to/from Buffer(Max.) 250 MB/sec

Data Transfer Rate / Buffer to/from Host(Max.) 300 MB/secAverage Latency 4.17 ms Drive Ready Time(typical) 1 sector in 10^15bits

Acoustics

Acoustics Idle 2.5 Bel Performance Seek 2.8 Bel

Environmental Specifications

Environmental Specifications Temperature / Operating 0 ~ 60 °C

Temperature / Non-operating -40 ~ 70 °C Humidity(non-condensing) / Operating 5 ~ 90 % Humidity(non-condensing) / Non-operating 5 ~ 95 % Liner Shock(1/2 sine pulse) / Operating 70 G Liner Shock(1/2 sine pulse) / Non-operating 300 G Altitude(relative to sea level) / Operating -300 to 3,000 m Altitude(relative to sea level) / Non-operating -300 to 12,000 m

Power Requirements

Power Requirements Voltage +5V±5%

Spin-up Current (Max.) 2.2A Seek (typical) 6.7W Read/Write (typical) 7.2W Idle (typical) 6.3W Standby (typical) 1W Sleep (typical) 1W

Physical Dimension

Physical Dimension Height (Max.) 26.1 mm Width 101.5 mm Length 147.0 mm Weight (avg.) 625 g